COAXIAL

FabricantModèleProduitCaractéristiquesAjouter à la sélection
AILTECH 7615 Noise Source 0.01-1.5 GHz
15.5 dB ENR, N(m), 28 VDC
+
AILTECH 7616 Noise Source 1-12.4 GHz
15.5 dB ENR, N(m), 28 VDC
+
AILTECH 7617 Noise Source 12.4-18 GHz
15.5 dB ENR, SMA(f), 28 VDC
+
AILTECH 7650-114 Noise Generator 379-441 MHz
37.0 dB ENR, N(m), 28 VDC
+
AILTECH 7650-115 Noise Generator 28-32 MHz
37.0 dB ENR, N(m), 28 VDC
+
AILTECH 7650-79 Noise Source 50-90 MHz
15.5 dB ENR, N(m), 28 VDC
+
ANRITSU 2000-768 DIN-7/16 female Short-Open-Load Calibration Tee DC-4 GHz
DC-12.4 GHz, 2 Watts, SMA(m/f)
+
EATON/AILTECH 7660-147 Noise Source 230-270 MHz
35.5 dB ENR, SMA(f), 28VDC
+
EATON/AILTECH 7650-055 Noise Source 2.55-2.85 GHz
15.5 dB ENR, N(m), 28VDC
+
FXR/MICROLAB HM-10N Signal Sampler DC-5 GHz
10 dB coupling, 2.5 dB ins.loss,Nm/f/f
+
GENERAL RADIO 1442-F 5 Ohm Resistance Standard DC-100 MHz
usable to 100 MHz, two GR900 ports
+
HP/KEYSIGHT 08566-60003 Mixer Bias Protection Network DC-6 GHz
BNC(f/f)
+
HP/KEYSIGHT 11665B Modulator 0.15-18 GHz
N(m/f), for use with HP 8755/6/7
+
HP/KEYSIGHT 11853A Accessory Kit DC-18 GHz
50 Ohm type n (one each 11511A/11512A N female/male short; two each N female/female and N male/male adapters)
+
HP/KEYSIGHT 11866A Short/ Open/ Load Kit DC-2 GHz
APC7 ; load is 909C, 1.005 VSWR
+
HP/KEYSIGHT 35678A Type N Cal DC-18 GHz
Kit, c/o 1 each 909C-012,200, 909C-013,200, male&female shorts, N(m/m) & N(f/f) adapters
+
HP/KEYSIGHT 5356D Harmonic Mixer Driver 36-110 GHz
adapts 5345A/5355A to 11970 series harmonic mixers
+
HP/KEYSIGHT 83572A-001,006 RF Sweeper Plug-in 26.5-40 GHz
+3 dBm, pulse/square wave and external levelling, for HP 8350B
+
HP/KEYSIGHT 85025C Detector Adapter DC-18 GHz
for HP 8757 sderies scalar network analyzers
+
HP/KEYSIGHT 85032E Calibration Kit DC-18 GHz
Type N Economy
+
HP/KEYSIGHT 85036B Calibration Kit DC-18 GHz
75 Ohm type N
+
HP/KEYSIGHT 85050B 7mm Calibration Kit DC-18 GHz
for HP 8510/ 8720
+
HP/KEYSIGHT 85051A 7mm Verification Kit DC-18 GHz
for HP 8510
+
HP/KEYSIGHT 8710-1766 APC7 Torque Wrench 6.5-15 GHz
12 lb.-in.
+
HP/KEYSIGHT U8487A Thermocouple Power Sensor 10 MHz-50 GHz
-35/+20 dBm range, built-in DC block, 2.4mm male input
+
MAURY MICROWAVE 8650P TNC Short-Open-Load Calibration Kit DC-18 GHz
includes (1 each male & female) termination, open, short, male-male, female-female; (2 each) APC7 adapters to male & female - no VNA disks included
+
MAURY MICROWAVE 8780M OSP male Short/ Open/ Load Calibration Kit DC-18 GHz
RF/LO=1-2800 MHz, LO=+26 dBm, IF=1-2000 MHz, SMA(f/f/f)
+
MAURY MICROWAVE 8780N-opt.01 OSP (male) Short/ Open/ Load Calibration Kit DC-6 GHz
RF/LO=4-8 GHz, LO=+7 dBm, IF=DC-3 GHz, SMA(f/f/f)
+
MAURY MICROWAVE A007A Gage Kit DC-18 GHz
N (male & female)
+
MAURY MICROWAVE A020A Gage Kit DC-18 GHz
Type N connector (male & female)
+
MAURY MICROWAVE A027 Boxed set of two hand held gages measure SMA male and female center contacts DC-34 GHz
RF/LO=5-18 GHz, LO=+7 dBm, IF=DC-6 GHz, SMA(f/f/f)
+
MAURY MICROWAVE A028D2 7mm Master Gage DC-18 GHz
for 7mm VNA calibration kit
+
MAURY MICROWAVE MT-7118A Cryogenic Termination DC-18 GHz
APC7
+
MICRONETICS NOD-5107 Noise Generator 100 Hz-100 MHz
-70 dBm per Hz, or +10 dBm max., 0-10 dB step attenuator, SMA(f) output, 120VAC power
+
MICRONETICS NOD-5108 (sma) Noise Generator 100 Hz-100 MHz
0-10 dB step attenuator, -75 dBm/Hz, or +10 dBm maximum, SMA(f) output, 120VAC power
+
MICRONETICS NOD-5108 (n) Noise Generator 100 Hz-100 MHz
0-10 dB step attenuator, -75 dBm/Hz, or +10 dBm maximum, N(f) output, 120VAC power
+
NARDA 466B Thermocouple Power Monitor Sensor 10 MHz-12.4 GHz
1-100mW, Nm
+
NARDA 466B Power Monitor 0.01-12.4 GHz
1-100 mW, for Narda meter
+
OMNI-SPECTRA 2598-5238-54 Set of two OSP gages: male pin & female pin 20 dB, 4-8 GHz, SMA(f/f) +
OMNI-SPECTRA 2598-5239-54 Set of two OSP gages: male pin & female pin 16 dB, 8-18 GHz, SMA(f/f) +
OMNI-SPECTRA 4098-5029-54 SMA male Pin & Dielectric Gage Kit DC-18 GHz
in case with depth standard
+
PASTERNACK PE-9504 2.4mm male to N male Adapter DC-18 GHz
40 dB, 800-950 MHz, SMA(f/f)
+
PICOSECOND PULSE LABS 5070A 70 nS Delay Line DC-18 GHz
SMA(f/f)
+
TEKTRONIX 015-0385-00 External Mixer Diplexer DC-18 GHz
for Tektronix 490/2750 series spec.an.
+
TEKTRONIX CT-2 / P6041 Current Transformer 1 millvolt per milliamp, into 50 Ohms +
WILTRON 3666 Verification Kit DC-26.5 GHz
3.5mm : 360 disk; 19S50-7 3.5mm airline; 19S50-7B 3.5mm BEATTY AIRLINE; 42S-20 & 42S-50 20 dB & 50 dB attenuators
+
WILTRON 6400-6N75 SWR Autotester 1-1000 MHz
75 Ohm N, 40 dB dir.,for 6400 series
+
WILTRON 6400-6N75-1 SWR Autotester 1-2000 MHz
5 Ohm N, 38 dB dir.,for 6400 series
+
Abonnez-vous à notre newsletter
1
    1
    Votre sélection
    7615
    1442-F
    Qty: 1