WAVEGUIDE
Recherche avancée
- ADAPTER
- AMPLIFIER
- ANTENNA
- ATTENUATOR
- CALIBRATION
- CIRCULAR SECTION
- CIRCULATOR
- CIRCULATOR / ADAPTER
- CONTROLLER
- CONVERTER
- COUPLER
- COVER PLATE
- DETECTOR
- DOUBLER
- E-H PLANE BEND
- E-H PLANE ELBOW
- E-H PLANE SWITCH
- E-H PLANE TUNER
- FEED HORN
- FILTER
- FLEXIBLE SECTION
- FLEXIBLE SECTION / TWIST SECTION
- FREQUENCY METER
- HORN SECTION
- ISOLATOR
- ISOLATOR / FILTER
- JIG
- JOINT
- LATERAL OFFSET
- MISMATCH SECTION
- MIXER
- MODULATOR
- NOISE SUPPRESSOR
- OSCILLATOR
- PHASE SHIFTER
- POLARIZER
- PRESSURIZATION SECTION
- REFLECTOMETER
- SENSOR
- SHUTTER
- SLOTTED LINE
- SOURCE
- STRAIGHT SECTION
- SWITCH
- TAPER
- TAPER SECTION
- TEE
- TERMINATION
- THERMISTOR MOUNT
- TUNER
- TWIST SECTION
| Fabricant | Modèle | Produit | Caractéristiques | Ajouter à la sélection |
|---|---|---|---|---|
| 3 dBm, INC. | CPR112-NFP | Adapter | 7.05-10.0 GHz CPR112 grooved flange x N(f) |
+ |
| 3 dBm, INC. | H-175 | Adapter | 7.05-10.0 GHz WR112 x N(f) |
+ |
| 3 dBm, INC. | P-175-S | Adapter | 12.4-18.0 GHz WR62 x SMA(f) |
+ |
| 3 dBm, INC. | CPR-112-NFP | Adapter | 7.05-10.0 GHz CPR112G (grooved flange) x N(f) brass |
+ |
| ACME MICROWAVE | 51-52 | Adapter | 7.05-10.0 GHz CPR112 (grooved flange) x WR112 (choke flange) 2 inches length, brass |
+ |
| ADVANCED MICROWAVE COMPONENTS | 3391/2027 | Adapter | 18.0-40.0 GHz WRD180 x 2.92mm(f) |
+ |
| AERCOM | 129511 | Iso-adapter | 5.85-8.20 GHz CPR137 (output) x SMAf (input) 18 dB isolation, 5.8-7.0 GHz, with -40 dB SMAf test ports |
+ |
| AERCOM | AER-0924 | Iso-Adapter | 5.85-8.20 GHz CPR137 20 dB isolation, 5.8-6.8 GHz, N(m) input/ CPR137F output, brass, 20 Watts maximum |
+ |
| AEROWAVE | 22-1990-SS | WR22 Flange Adapter | 33.0-50.0 GHz UG383/U round flange to modified-UG599/U square flange, built on a 90 degree H-Plane bend |
+ |
| AERTECH | AWI8012-2 | Iso-Adapter | 8.2-12.4 GHz WR90 20 dB isolation, 8.2-12.4 GHz,SMAf in/ WR90 out |
+ |
| AERTECH | AMF-5891-2 | Iso-Adapter | 7.05-10.0 GHz WR112 20 dB, 7.05-8.5 GHz,SMAf in/WR112 choke fl.out |
+ |
| AERTECH | AMF-5891-1 | Iso-Adapter | 7.05-10.0 GHz WR112 20 dB, 7.05-8.5 GHz,WR112 choke fl.in/SMAf out |
+ |
| AINSLEE ANTENNA | 229-N | Adapter | 3.30-4.90 GHz CMR229 x N(f) brass |
+ |
| AIRTRON | 502016 | Adapter | 4.90-7.05 GHz WR137 UG340(mod) round 6-hole flange x N(f) |
+ |
| AIRTRON | 19263-D | Feedthru Bulkhead | 8.2-12.4 GHz WR90 4 inches length, 3.5 inch diameter 6-hole mounting, aluminum, cover/choke flanges |
+ |
| ALCATEL | 470117828 | End Launch Adapter | 5.85-8.20 GHz CMR137 x SMA(f) 5.9-6.4 GHz bandwidth |
+ |
| ALCATEL | 1876-SFO | WR42 Iso-Adapter | 18.0-26.5 GHz 20 dB isol., 17.7-19.7 GHz, WR42-in/SMAf-out |
+ |
| AMPHENOL | 131-1202 | Adapter | 8.2-12.4 GHz WR90 x APC7 |
+ |
| ANDREW | 54118-112 | Adapter | 7.05-10.0 GHz CPR112 (grooved flange) x N(f) |
+ |
| ANDREW | 54418-137 | Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x N(f) |
+ |
| ANDREW | 55983-137 | Adapter | 5.85-8.20 GHz CMR137 x N(f) |
+ |
| ANDREW | 59210-137 | Adapter | 5.85-8.20 GHz WR137 x N(f) |
+ |
| ANDREW | C137-CNDG | Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x N(f) |
+ |
| ANDREW | C137-FNSG | Adapter | 5.85-8.20 GHz CMR137 x N(f) |
+ |
| ANDREW | C075-YNSG | Adapter | 10.0-15.0 GHz WR75 (choke flange) x N(f) |
+ |
| ANDREW | 59210-90 | Adapter | 8.2-12.4 GHz WR90 x N(f) |
+ |
| ANDREW | 55526-4 | Adapter | 7.05-10.0 GHz CPR112G (grooved flange) x WR112 (UG51 flange) 4 inches length, brass |
+ |
| ANDREW | 55437-137 | Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x CMR137 4 inches length, brass |
+ |
| ANDREW | 65581-4" | Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x CMR137 4 in. length, brass |
+ |
| ANDREW | C137-CNSG | Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x N(f) brass |
+ |
| ANDREW | 54418-229 | Adapter | 3.30-4.90 GHz CPR229G (grooved flange) x N(f) aluminum body |
+ |
| ANDREW | 54418A-229 | Adapter | 3.30-4.90 GHz CPR229G (grooved flange) x N(f) brass body |
+ |
| ANDREW | C284CNSG | Adapter | 2.60-3.95 GHz CPR284G (grooved flange) x N(f) brass body *new old stock* |
+ |
| ANDREW | 55437-90 | Adapter | 8.2-12.4 GHz CPR90 (grooved ) x CMR90 4 inches length *new old stock* |
+ |
| ANDREW | C090-CNSG | Adapter | 8.2-12.4 GHz CPR90G (grooved flange) X N(f) brass body |
+ |
| ANDREW | 54418A-90 | Adapter | 8.2-12.4 GHz CPR90G x N(f) brass body |
+ |
| ANDREW | C137-ENSG | Adapter | 5.85-8.20 GHz CMR137 x N(f)brass |
+ |
| ANDREW | R137PC0040ESN | Flange Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x CMR137 brass, 4 inches length |
+ |
| ANDREW | A075HMG | Flange Adapter | 10.0-15.0 GHz CPR75G (PDR120) to UG flange (MIL-F-3922/70-016) brass, 4 inches length *new old stock* |
+ |
| ANDREW | 59210A-187 | WR187 (choke flange) x N(f) Adapter | 3.95-5.85 GHz brass construction |
+ |
| ANDREW | A062HMG | WR62 UG419/U flange to PDR120 flange Adapter | 12.4-18.0 GHz 4 inches length, brass *new old stock* |
+ |
| ANDREW | T062KHM | WR62 UG541A choke flange to PDR140 grooved flange Adapter | 12.4-18.0 GHz 6 inches length, brass, dent tuned for 12.4-15.0 GHz |
+ |
| ANRITSU | 35UA159N | Adapter | 4.90-7.05 GHz CPR159 x N(m) |
+ |
| ANRITSU | 35WR10WF | Adapter | 75-110 GHz WR10 x 1.0mm(f) |
+ |
| ANRITSU | 35UA112N | Adapter | 7.05-10.0 GHz CPR112/WR112 (UG138/U) x N(m) |
+ |
| ANRITSU | 35UM70N | Adapter | 5.85-8.20 GHz WR137 UAR70/UDR70 x N(m) |
+ |
| ANRITSU | 35UM70N | Adapter | 5.85-8.20 GHz UAR70/ WR137 to N male |
+ |
| ANRITSU | 35WR19V | Adapter | 40-60 GHz WR19 x 1.85mm(m) |
+ |
| ANRITSU | 35WR19VF | Adapter | 40-60 GHz WR19 x 1.85mm(f) |
+ |
| ANRITSU | 35UA42K | Adapter | 18.0-26.5 GHz WR42 x 2.92mmm male |
+ |
| ANRITSU | 35WRD180K | Adapter | 18.0-40.0 GHz WRD180 x 2.92mm male |
+ |
| ANRITSU | 35WR15VF | WR15 x 1.85mm(f) Adapter | 50-75 GHz 50-67 GHz |
+ |
| APOLLO MICROWAVES | 10514 | Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x N(f) |
+ |
| APOLLO MICROWAVES | 10516 | Adapter | 5.85-8.20 GHz CPR137F x SMA(f) |
+ |
| APOLLO MICROWAVES | 17144 | Adapter | 26.5-40.0 GHz WR28 UG600 choke flange x 2.4mm(f) |
+ |
| APOLLO MICROWAVES | WRD580 x CPR112G | Step Transition | 5.8-16.0 GHz WRD580 x CPR112G aluminum, 0.8 inch length |
+ |
| APOLLO MICROWAVES | 14975 | Stepped Taper Transition | 5.8-16.0 GHz WRD580 (grooved flange) x CPR137G (grooved flange) 2.14 inches length, aluminum |
+ |
| ARRA | WG136P6J2 | Adapter | 7.05-10.0 GHz CMR112 x N(f) |
+ |
| ARRA | CPR112G-460B-M | Adapter | 7.05-10.0 GHz CPR112 (grooved flange) x N(m) |
+ |
| ARRA | WG127P1 | Adapter | 7.05-10.0 GHz CMR112 x SMA(f) Adapter |
+ |
| ARRA | CMR-137-460 | Adapter | 5.85-8.20 GHz CMR137 x N(f) |
+ |
| ARRA | CPR137G-460B | Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x N(f) |
+ |
| ARRA | 75-460 | Adapter | 10.0-15.0 GHz WR75 x N(f) |
+ |
| ARRA | 90-463 | Adapter | 8.2-12.4 GHz WR90 x APC7 |
+ |
| ARRA | AW1134-3 | Adapter | 5.85-8.20 GHz CMR137 x N(f) brass |
+ |
| ARRA | W101S | Adapter | 7.05-10.0 GHz CPR112 (flat flange) to WR112 (cover flange) 6 inches length, silver/brass |
+ |
| ARRA | 75-463 | WR75 x APC7 Adapter | 10.0-15.0 GHz aluminum body |
+ |
| ARRA | 75-463B | WR75 x APC7 Adapter | 10.0-15.0 GHz brass body |
+ |
| ATLANTIC MICROWAVE | 21XL-5A1 | Adapter | 7.05-10.0 GHz WR112 (coke flange) x N(f) |
+ |
| ATLANTIC MICROWAVE | AMC-0011 | Adapter | 7.05-10.0 GHz WR112 (choke flange) x SMA(m) |
+ |
| ATLANTIC MICROWAVE | CW7500 | Adapter | 10.0-15.0 GHz WR75 x SMA(f) |
+ |
| ATLANTIC MICROWAVE | AMC-1466 | WR28 Orthomode Tee Adapter | 26.5-40.0 GHz UG599/U flanges on thru-line, 0.21 x 0.21 inch square waveguide on orthomode arm, 1 inch length, aluninum |
+ |
| ATM | 137-253B-2 | Adapter | 5.85-8.20 GHz CPR137 x N(f) |
+ |
| ATM | 42-201B-6 | Adapter | 18.0-26.5 GHz WR42 x SMA(f) End Launch |
+ |
| ATM | 42-25KA-6 | Adapter | 18.0-26.5 GHz WR42 x 2.92mm(f) |
+ |
| ATM | 112-253B-2 | Adapter | 7.05-10.0 GHz CPR112F x N(f) brass body, flat flange |
+ |
| ATM | 90-253-2 | Adapter | 8.2-12.4 GHz CPR90F x N(f) brass body, flat flange |
+ |
| ATM | 112-201B-2 | End Launch Adapter | 7.05-10.0 GHz CPR112F x SMA(f) brass body, flat flange |
+ |
| ATM | 90-201B-2 | End Launch Adapter | 8.2-12.4 GHz CPR90F x SMA(f) brass body, flat flange |
+ |
| ATM | 62-201B-6 | End Launch Adapter | 12.4-18.0 GHz WR62 x SMA(f) |
+ |
| ATM | 90-203B-6 | End Launch Adapter | 8.2-12.4 GHz WR90 x N(f) |
+ |
| ATM | 62-251-6 | WR62 x SMA(f) Adapter | 12.4-18.0 GHz brass body |
+ |
| ATM | 75-203A-8 | WR75 (choke flange) x N(f) End Launch Adapter | 10.0-15.0 GHz aluminum body, 450 Watts CW/ 11 kW peak *new old stock* |
+ |
| ATM | 75-253B-6 | WR75 x N(f) Adapter | 10.0-15.0 GHz brass body, 150 Watts CW/ 3 kW peak, 1.25 VSWR |
+ |
| AUTOMOTIVE RADAR | WR10 horn | Sectoral Horn | 75-110 GHz WR10 15 dBi gain, uses proprietary square 4-hole flange pattern on 0.22 inch centers, length= 0.72 inch, aperture= 0.45 x 0.25 inch, aluminum construction |
+ |
| AUTOMOTIVE RADAR | flange adapter | UG387/U Flange Adapter to 0.22" 4-hole square proprietary flange pattern of sectoral horn | 75-110 GHz WR10 1 inch length, aluminum |
+ |
| AXCERA | WR340-Nf | Adapter | 2.20-3.30 GHz WR340 X N(f) |
+ |
| CABLEWAVE | 901170-42 | Adapter | 5.85-8.20 GHz CPR137 x CMR137 4.6 inches length, aluminum |
+ |
| CABLEWAVE | 920411 | Flange Adapter | 5.85-8.20 GHz CPR137 (grooved flange) x CMR137 brass, 4 inches length |
+ |
| CALIFORNIA MICROWAVE | TR43-CW112 | Adapter | 3.30-4.90 GHz CMR229 x SMA(f) |
+ |
| CALIFORNIA MICROWAVE | TR117 | Adapter | 10.0-15.0 GHz WR75 x SMA(f) |
+ |
| CERNEX | CWK-42-M | Adapter | 18.0-26.5 GHz WR42 x 2.92mm(m) |
+ |
| CMT | RA137-K-F-21BC | Adapter | 5.85-8.20 GHz CMR137 x 2.92mm(f) |
+ |
| CMT | RA22-K-F | Adapter | 33.0-50.0 GHz WR22 x 2.92mm(f) |
+ |
| CMT | RA28-K-F-1A-A | Adapter | 26.5-40.0 GHz WR28 x 2.92mm(f) |
+ |
| CMT | RA42-K-F-1A-A | Adapter | 18.0-26.5 GHz WR42 x 2.92mm(f) |
+ |
| CMT | RA75-N-F-4AA | Adapter | 10.0-15.0 GHz WR75 (choke flange) x N(f) |
+ |
| CMT | RA75-SMA-F-13A-AA | Adapter | 10.0-15.0 GHz CPR75 (PDR120) x SMA(f) |
+ |
| CMT | 1062204 | Adapter | 6.5-18.0 GHz WRD650 x SMA(f) |
+ |
| CMT | 106535 | Adapter | 6.5-18.0 GHz WRD650 x TNC(f) |
+ |
| CMT | DRA-750-SMA-F | Adapter | 7.5-18.0 GHz WRD750 x SMA(f) |
+ |
| CMT | RA284-TNC-F-13A-A | Adapter | 2.60-3.95 GHz CMR284 / CPR284F (flat flange) x TNC(f) aluminum, drilled for both CPR & CMR hole patterns |
+ |
| CMT | RA187-7MM | Adapter | 3.95-5.85 GHz CPR187 (flat flange) x APC7 aluminum body |
+ |
| CMT | RA284-7MM | Adapter | 2.60-3.95 GHz CPR284F (flat flange) x APC7 aluminum body |
+ |
| CMT | FLG580-2-C | Aluminum flat flange | 5.8-16.0 GHz WRD580 *new old stock* |
+ |
| CMT | RAH187-N-F-1A-A | WR187 High Power Adapter to N(f) | 3.95-5.85 GHz aluminum body, 1000 Watts average power |
+ |
| CMT | RA187-N-F-1A-A | WR187 x N(f) Adapter | 3.95-5.85 GHz aluminum body |
+ |
| CMT | RAH187-TNC-1A-A | WR187 High Power Adapter to TNC(f) | 3.95-5.85 GHz aluminum body, 1000 Watts average power |
+ |
| CMT | BFU22-1A1A-A-SP | WR22 (UG599/U-M square flange) Bulkhead Feedthrough | 33.0-50.0 GHz 3 in. length, 1.75 in. 8-hole flange mount, aluminum |
+ |
| CMT | 1062690 | WR28 x 2.92mm male Adapter | 26.5-40.0 GHz incorporates mitre E Plane bend, 2.65 x 3.85 inch leg lengths *new old stock* |
+ |
| CMT | RA284-N-F-1A-A | WR284 x N(f) Adapter | 2.60-3.95 GHz aluminum body |
+ |
| CMT | RA34-2.4-F-2A-A | WR34 x 2.4mm(f) Adapter | 22-33 GHz aluminum body |
+ |
| CMT | 1063931 | WR34 x 2.92mm(f) Adapter | 22-33 GHz brass body |
+ |
| CMT | RA34-K-F-1A-A | WR34 x 2.92mm(f) Adapter | 22-33 GHz aluminum body, flange interface drilled for both UG1530 and UBR260 hole patterns |
+ |
| CMT | BFU51-1B1B-C | WR51 Bulkhead Feedthrough Unit | 15.0-22.0 GHz 3 inches length, mounting on a 3.25 inch diameter 8-hole plate |
+ |
| COMMSCOPE | C090-CNSG | Adapter | 8.2-12.4 GHz CPR90G (grooved flange) x N(f) |
+ |
| CUSTOM MICROWAVE | BRJ flange adapter | WR8 flange adapter from Anritsu BRJ flange (used on MP82B power sensor) to MIL.F3922/67B (UG387 compatible) flange | 90-140 GHz 2 inches length |
+ |
| DEMORNAY BONARDI | DBJ-059 | Adapter | 5.85-8.20 GHz WR137 x APC7 |
+ |
| DEMORNAY BONARDI | DBF-275 | WR62 Feedthru Bulkhead | 12.4-18.0 GHz 3 inches length, brass, 3.25 in. dia. 6-hole mounting plate, cover/choke flanges |
+ |
| DEMORNAY BONARDI | DBFA-057-SA | WR75 (choke flange) x N(f) Adapter | 10.0-15.0 GHz aluminum |
+ |
| DEMORNAY BONARDI | DBFA-057 | WR75 x N(f) Adapter | 10.0-15.0 GHz brass |
+ |
| DORADO INTERNATIONAL | WA-284-N | Adapter | 2.60-3.95 GHz CPR284F (flat flange) x N(f) brass body |
+ |
| ELETTRONICA | I-598-010-603 | Adapter | 7.5-18.0 GHz WRD750 x SMA(f) |
+ |
| ELMIKA | CWA-20E | Adapter | 12.4-18.0 GHz WR62 x SMA(f) |
+ |
| ERA TECHNOLOGY | WR12-WR42 taper | Transition | 60-90 GHz WR12 x WR42 H-Plane transitioned from WR42 E-Plane |
+ |
| FARINON | 89-80443-016 | Adapter | 7.05-10.0 GHz CPR112 x CMR112 1.75 inch length, brass |
+ |
| FARINON | 89-80442-027 | Adapter | 5.85-8.20 GHz CPR137G x CMR137 1.75 inch length, brass |
+ |
| FARINON | ISOADAPTER | WR187 input/ SMA(f) output Iso-Adapter | 3.95-5.85 GHz 25 dB isol., 4.5-5.85 GHz |
+ |
| FARINON | 01-005474-00 | WR62 Iso-Adapter | 12.4-18.0 GHz 20 dB isol., 12.4-15 GHz, WR62 input/SMA(f) out |
+ |
| FARINON | 089-080444-022 | WR90 (UG39) x CPR90 Flange Adapter | 8.2-12.4 GHz 1.75 inch length, brass |
+ |
| FERROCOM | 6189-SFI | Iso-Adapter | 5.85-8.20 GHz CMR137 5.925-6.425 GHz, SMA(f) input / CMR137 output |
+ |
| FERROCOM | 6181-SF1 | Iso-Adapter | 5.85-8.20 GHz CMR137 x SMA(f) 20 dB isolation, 5.925-6.425 GHz, SMA input, waveguide output |
+ |
| FERROCOM | 4700-SFI | Iso-Adapter | 3.95-5.85 GHz CMR187 25 dB isolation, 4.4-5.0 GHz, SMA(f) input/ CMR187 output |
+ |
| FERROCOM | 9052-SFO | Iso-Adapter | 8.2-12.4 GHz WR90 20 dB, 8.2-12.4 GHz, WR90 in/ SMA(f) out |
+ |
| FERROCOM | 1571-SMI | WR62 Iso-Adapter | 12.4-18.0 GHz 20 dB isol., 12.4-15 GHz, SMA(m) input/WR62 out |
+ |
| FERROCOM | 1125-SMI | WR75 Iso-Adapter | 10.0-15.0 GHz 30 dB isolation, 10.7-11.7 GHz, SMA(m) input/ WR75 output |
+ |
| FLANN MICROWAVE | 26373-WF60 | Adapter | 60-90 GHz WR12 x 1.0mm female |
+ |
| FLANN MICROWAVE | 10/9-2 | Adapter | 2.60-3.95 GHz WR284 x N(f) |
+ |
| FLANN MICROWAVE | 18094-SF40 | Adapter | 12.4-18.0 GHz WR62 x SMA(f) |
+ |
| FLANN MICROWAVE | 17/9-2 | Adapter | 10.0-15.0 GHz WR75 x N(f) |
+ |
| FLANN MICROWAVE | 17093-SF50 | Adapter | 10.0-15.0 GHz UDR120 (CPR75) x SMA(f) |
+ |
| FLANN MICROWAVE | 16094-SF40 | Adapter | 8.2-12.4 GHz WR90 x SMA(f) 1.12 VSWR |
+ |
| FLANN MICROWAVE | 18/9-2 | Adapter | 7.05-10.0 GHz WR112 x N(f) VSWR 1.2 |
+ |
| FLANN MICROWAVE | 15094-SF40 | Adapter | 7.05-10.0 GHz WR112 x SMA(f) 1.12 VSWR |
+ |
| FLANN MICROWAVE | 12094-SF40 | WR187 x SMA(f) Adapter | 3.95-5.85 GHz 1.14 VSWR |
+ |
| FLANN MICROWAVE | 22000-20 | WR28 x WR42 Tapered Tranisition | 26.5-40.0 GHz 1.95 inch length |
+ |
| FLANN MICROWAVE | 20000-18 | WR42 (cover flange) x WR62 (choke flange) Tapered Transition | 18.0-26.5 GHz 2.25 inches length |
+ |
| FLANN MICROWAVE | 20000-25 | WR42 x WR15 Tapered Transition | 50-75 GHz 2.4 inches length |
+ |
| FLANN MICROWAVE | 19094-SF40 | WR51 (UBR180 flange) x SMA(f) Adapter | 15.0-22.0 GHz 1.12 VSWR |
+ |
| FLANN MICROWAVE | 18441-140 | WR62 UG419/U cover flange to PDR140 grooved flange Adapter | 12.4-18.0 GHz 4 inches length, brass |
+ |
0
0
Votre sélection
Votre sélection est vide