WAVEGUIDE
Recherche avancée
- ADAPTER
- AMPLIFIER
- ANTENNA
- ATTENUATOR
- CALIBRATION
- CIRCULAR SECTION
- CIRCULATOR
- CIRCULATOR / ADAPTER
- CONTROLLER
- CONVERTER
- COUPLER
- COVER PLATE
- DETECTOR
- DOUBLER
- E-H PLANE BEND
- E-H PLANE ELBOW
- E-H PLANE SWITCH
- E-H PLANE TUNER
- FEED HORN
- FILTER
- FLEXIBLE SECTION
- FLEXIBLE SECTION / TWIST SECTION
- FREQUENCY METER
- HORN SECTION
- ISOLATOR
- ISOLATOR / FILTER
- JIG
- JOINT
- LATERAL OFFSET
- MISMATCH SECTION
- MIXER
- MODULATOR
- NOISE SUPPRESSOR
- OSCILLATOR
- PHASE SHIFTER
- POLARIZER
- PRESSURIZATION SECTION
- REFLECTOMETER
- SENSOR
- SHUTTER
- SLOTTED LINE
- SOURCE
- STRAIGHT SECTION
- SWITCH
- TAPER
- TAPER SECTION
- TEE
- TERMINATION
- THERMISTOR MOUNT
- TUNER
- TWIST SECTION
| Fabricant | Modèle | Produit | Caractéristiques | Ajouter à la sélection |
|---|---|---|---|---|
| 3 dBm, INC. | XJ-170 | WR187 x WR90 Taper Section | 3.95-5.85 GHz 10 inches length, brass |
+ |
| 3 dBm, INC. | NP170 | Taper | 15.0-22.0 GHz WR51 (UBR180 flange) x WR62 *new old stock* |
+ |
| ADVANCED MICROWAVE COMPONENTS | 112TR580DR | Taper | 5.8-16.0 GHz WRD580 (flat flange) x CPR112 (grooved flange) 5.7 in. |
+ |
| ADVANCED MICROWAVE COMPONENTS | 3037003-016 | Taper | 5.8-16.0 GHz WRD580 (flat flange) x CPR137 (grooved flange) 5.7 in. |
+ |
| ADVANCED MICROWAVE COMPONENTS | 112TR580DR-1 | Taper | 5.8-16.0 GHz WRD580 (grooved flange) x CPR112 (grooved flange) 5.7 in. |
+ |
| AERO-GEO ASTRO | 1011 | Taper Section | 8.2-12.4 GHz WR90 x WR62 6 inches length, brass |
+ |
| AEROWAVE | 22-1015 | WR15 (UG385/U) to WR22 (UG383/U) Taper | 50-75 GHz 1.6 inch length |
+ |
| AEROWAVE | 22-1019 | WR19 x WR22 Taper Section | 40-60 GHz 1.25 inch length |
+ |
| AIRCOM | 112-90 | Taper Section | 7.05-10.0 GHz WR112 x WR90 5.45 inches length, silver/brass |
+ |
| AIRTECH | 2682 | Taper Section | 5.85-8.20 GHz WR137 x WR112 6 inches length, silver/brass |
+ |
| AIRTRON | A680046-1 | DR19 x WR102 Taper Section | 4.75-11.0 GHz 1.1 inch length, aluminum (DR19 is not compatible with WRD475, but is similar) |
+ |
| ANDREW | 59220-33 | Taper Section | 5.85-8.20 GHz CPR137G (grooved) x CPR112G (grooved) 7.5 inches length, 7.5 inches length, brass |
+ |
| ANDREW | 66078-7 | Taper Section | 8.2-12.4 GHz CPR90G (grooved flange) x WR75 3.38 inches length, brass |
+ |
| APOLLO MICROWAVES | 101-0975 | Taper | 5.85-8.20 GHz CPR137F x CMR112 3 inches length, brass |
+ |
| APOLLO MICROWAVES | CPR187 x WR75 | Taper Section | 3.95-5.85 GHz CPR187 x WR75 12.1 inches length, aluminum |
+ |
| APOLLO MICROWAVES | 75328-165 | WR75 x WR62 Taper Section | 10.0-15.0 GHz 5.87 inches length, brass |
+ |
| ASAP AEROSPACE | 700728 | Taper Section | 4.90-7.05 GHz CPR159 (grooved flange) x WR112 8.375 inches length, aluminum |
+ |
| ATLANTIC MICROWAVE | AMC112-TR580 | Taper | 5.8-16.0 GHz WRD580 x CPR112 (grooved flange) 5.7" length |
+ |
| BAYTRON | 3X-69/V | WR15 x WR90 Taper Section | 50-75 GHz 8.25 inches length, gold/brass |
+ |
| BOGART | 882352-1 | WR75 (cover flange) x WR90 (choke flange) Taper | 10.0-15.0 GHz 3.5 inches length, aluminum |
+ |
| CABLEWAVE | WR51 x WR42 | WR51 (choke flange) x WR42 Taper Section | 15.0-22.0 GHz brass, 3 inches length |
+ |
| CMT | WT475-112-8 | Taper Section | 4.75-11.0 GHz WRD475 x CPR112 8 inches length, aluminum |
+ |
| CMT | WT650-102A | Waveguide Taper | 6.5-18.0 GHz WRD650 x WR102 6-1/2 inches length |
+ |
| CMT | WT650-112-1C-1A | Taper Section | 6.5-18.0 GHz WRD650 x WR112 (UG flange) 6.5 inches length, aluminum |
+ |
| CMT | WT62-75-8B-7B-B | WR62 (choke flange) x WR75 (choke flange) Taper Section | 12.4-18.0 GHz 4 inches length, brass |
+ |
| CONNECTICUT MICROWAVE | CMM-011 | WR62 x WR51 (UBR1280 flange) Taper Section | 12.4-18.0 GHz 2.38 inches length, aluminum |
+ |
| CUBIC | CU-51-1000 | WR284 x WR112 Taper Section | 2.60-3.95 GHz 9.38 inches length |
+ |
| CUBIC | CU-52-1000 | WR284 x WR90 Taper Section | 2.60-3.95 GHz 10.38 inches length |
+ |
| DEMORNAY BONARDI | DBDE-018 | WR42 to WR28 Taper Section | 18.0-26.5 GHz 3.38 inches length |
+ |
| DEMORNAY BONARDI | DBGH-018 (choke) | Taper Section | 7.05-10.0 GHz WR112 x WR90 choke/choke flanges, 3-3/4 inches |
+ |
| DEMORNAY BONARDI | DBGH-018 (cover) | Taper Section | 7.05-10.0 GHz WR112 x WR90 cover/cover flanges, 3-3/4 inches |
+ |
| DEMORNAY BONARDI | DBHJ-018 | Taper Section | 5.85-8.20 GHz WR137 x WR112 4.5 inches length |
+ |
| DEMORNAY BONARDI | DBDB-018 | WR15 x WR28 Taper Section | 50-75 GHz 2 inches length |
+ |
| DEMORNAY BONARDI | DBLH-018 | WR284 x WR112 Taper Section | 2.60-3.95 GHz 9.5 inches length, cover flanges |
+ |
| DORADO INTERNATIONAL | WT-Ka-W | Taper Section | 75-110 GHz WR10 x WR28 1.05 inches length |
+ |
| DORADO INTERNATIONAL | WT-Ka | WR28 x WR42 Taper Section | 26.5-40.0 GHz 0.95 inch length |
+ |
| FLANN MICROWAVE | 16000-26 | Taper Section | 60-90 GHz WR12 x WR90 (choke flange) 40mm length |
+ |
| FXR/MICROLAB | X635Y | Taper Section | 8.2-12.4 GHz WR90 x WR62 4.2 inches length, brass |
+ |
| FXR/MICROLAB | W635X | Taper Section | 7.05-10.0 GHz WR112 x WR90 3.5 inches length |
+ |
| FXR/MICROLAB | WR15 x WR8 taper | WR8 x WR15 Taper Section | 90-140 GHz 1 inch length, WR8 FXR (mini) flange x WR15 UG385/U flange |
+ |
| GENERAL ELECTRIC | 126290 | WR51 x WR42 Taper Section | 15.0-22.0 GHz 1.5 inch length, brass |
+ |
| GENERIC | CPR284 - 0.43" height x 2.375" width Taper | 3-step Taper | 2.60-3.95 GHz CPR284 to 0.43 x 2.375 inch waveguide (on CPR284 flange) 4.35 inches length, brass |
+ |
| GENERIC | CPR112G x CPR90G | Taper Section | 7.05-10.0 GHz CPR112 (grooved flange) x CPR90 (grooved flange) 2.5 inches length, brass |
+ |
| GENERIC | CPR137 x CPR112 | Taper Section | 5.85-8.20 GHz CPR137 x CPR112 brass, 7.5 inches length |
+ |
| GENERIC | CPR229 X WR284 | Taper Section | 3.30-4.90 GHz CPR229 to WR284 5-1/8 inches length |
+ |
| GENERIC | CMR137 x CMR112 5.32" | Taper Section | 5.85-8.20 GHz CMR137 x CMR112 5.32 inches length, brass |
+ |
| GENERIC | CMR137 x CMR112 6" | Taper Section | 5.85-8.20 GHz CMR137 x CMR112 6 inches lenghth, brass |
+ |
| GENERIC | WRD350 x WR187 | Taper Section | 3.5-8.2 GHz WRD350 x WR198 6.19 inches length, brass |
+ |
| GENERIC | WR102 x WR112 | Taper Section | 7.5-11.0 GHz WR10 (choke flange) x WR112 (choke flange) 2.38 inches length, brass |
+ |
| GENERIC | WR284-WR187 taper | WR284 x WR187 Taper Section | 2.60-3.95 GHz 12 inches length, brass |
+ |
| GENERIC | WR62 x WR42 taper | WR42 x WR62 Taper Section | 18.0-26.5 GHz silver/brass, 4.5 inches length |
+ |
| GENERIC | WR51 x WR42 taper | WR51 (drilled for UG and UBR flanges) x WR42 (UG595) Taper Section | 15.0-22.0 GHz 2.5 inches length, aluminum |
+ |
| GENERIC | WR51 x WR62 taper | WR51 x WR62 Taper Section | 15.0-22.0 GHz 2.375 inches length, brass |
+ |
| GHZ TECHNOLOGIES | WR34-WR22 | WR34 x WR22 Taper Section | 22-33 GHz 1.85 inch length, gold flashed |
+ |
| HNL, INC. | WT51-62-7A-1AA | WR51 (choke flange) x WR62 (cover flange) Taper | 15.0-22.0 GHz 3.88 inches length, aluminum |
+ |
| HP/KEYSIGHT | NP292A | Taper | 15.0-22.0 GHz WR51 (UBR180 flange) x WR62 |
+ |
| HP/KEYSIGHT | HX292B | Waveguide Taper | 7.05-10.0 GHz WR112 x WR90 |
+ |
| HP/KEYSIGHT | NK292A | Waveguide Taper | 15.0-22.0 GHz WR51 (UBR180 flange) x WR42 |
+ |
| HP/KEYSIGHT | MP292A | Waveguide Taper | 10.0-15.0 GHz WR75 x WR62 |
+ |
| HP/KEYSIGHT | MP292B | Waveguide Taper | 10.0-15.0 GHz WR75 x WR62 |
+ |
| HP/KEYSIGHT | MX292A | Waveguide Taper | 10.0-15.0 GHz WR90 x WR75 |
+ |
| HP/KEYSIGHT | MX292B | Waveguide Taper | 10.0-15.0 GHz WR90 x WR75 |
+ |
| M.C.S. | XS-170 | WR284 x WR90 Waveguide Taper | 2.60-3.95 GHz 10 inches length, brass |
+ |
| MCLI | 159-62 taper | Taper Section | 4.90-7.05 GHz CPR159 (grooved flange) x WR62 (choke flange) 6 inches length, brass |
+ |
| MICROGUIDE | DRT650/102 | Waveguide Taper | 6.5-18.0 GHz WRD650 x WR102 4 inches length |
+ |
| MICROTECH | 203326 | Taper Section | 7.05-10.0 GHz WR112 x WR90 3.25 inches length, aluminum, choke/choke flanges |
+ |
| MICROWAVE ASSOCIATES | MA-807-52 | Taper Section | 7.05-10.0 GHz WR112 x WR90 3.38 inches length, brass |
+ |
| MICROWAVE DEVELOPMENT | 23650-482 | Taper | 6.5-18.0 GHz WRD650 x CPR137F 5.75 inches length, aluminum |
+ |
| MICROWAVE DEVELOPMENT | 23475-75 | Taper Section | 7.5-18.0 GHz WRD475 x WRD750 6 inches length |
+ |
| MICROWAVE RESEARCH | DRT650/102 | Taper Section | 6.5-18.0 GHz WRD650 x WR102 4 inches length |
+ |
| MICROWAVE RESEARCH | R31-W | Waveguide Taper | 4.75-11.0 GHz WRD475 x WR102 6 inches length |
+ |
| MICROWAVE RESEARCH | R81-J | Waveguide Taper | 4.75-11.0 GHz WRD475 x CPR137 5.5 inches length |
+ |
| MICROWAVE RESEARCH | R31-J | Waveguide Taper | 4.75-11.0 GHz WRD475 x WR137 5.9 inches length |
+ |
| MICROWAVE RESEARCH | R31-G | Waveguide Taper | 4.75-11.0 GHz WRD475 x WR187 5.75 inches length |
+ |
| MICROWAVE RESEARCH | R31-X | Waveguide Taper | 4.75-11.0 GHz WRD475 x WR90 6 inches length |
+ |
| MICROWAVE RESEARCH | R50-51 | Waveguide Taper | 4.75-11.0 GHz WRD475 x WRD750 5 inches length |
+ |
| MICROWAVE RESEARCH | M30-P | WR75 x WR62 Taper Section | 10.0-15.0 GHz 2.98 inches length, aluminum |
+ |
| MILITARY | MX-135/AP (aluminum) | Taper Section | 7.05-10.0 GHz WR112 (choke flange) x WR90 2.35 inches length, aluminum |
+ |
| MILITARY | MX-135?AP (brass) | Taper Section | 7.05-10.0 GHz WR112 (choke flange) x WR90 2.05 inches length, brass |
+ |
| MILLITECH | TWT-42-S15R0 | WR42 x WR15 Taper Section | 50-75 GHz 2.7 inches length |
+ |
| MITEC | CMR159 x CMR137 | Taper Section | 4.90-7.05 GHz CMR159 x CMR137 6.25 inches length, brass |
+ |
| NEICO MICROWAVE | 21161-1 | Waveguide Taper | 6.5-18.0 GHz WRD650 x WR102 6-1/2 inches length |
+ |
| NIECO | WR284-CPR229 | WR284 x CPR229G (grooved flange) Taper | 2.60-3.95 GHz brass, 5.12 inches length |
+ |
| OMEGA LABS | CPR112 x CPR90 taper | Taper Section | 7.05-10.0 GHz CPR112G (grooved flange) x CPR90G (grooved flange) brass, 5.8 inches lengthj |
+ |
| OMEGA LABS | 698-699 | Taper Section | 8.2-12.4 GHz WR90 x WR62 3 inches length, silver/brass |
+ |
| OMEGA LABS | 51-42 | WR51 (UBR180 flange) x WR42 Taper Section | 15.0-22.0 GHz 3 inches length, silver/brass |
+ |
| OMEGA LABS | 62-51 | WR62 x WR51 (UBR180 flange) Taper Section | 12.4-18.0 GHz 3 inches length, silver/brass |
+ |
| PENN ENGINEERING | 4556-55BM2 | Taper Section | 2.60-3.95 GHz CPR284 x CPR137 12 inches length, silver plated brass |
+ |
| PENN ENGINEERING | 4556-55BM1 | Taper Section | 2.60-3.95 GHz CPR284 x CPR187 8.12 inches length, silver plated brass |
+ |
| PENN ENGINEERING | 4548-51BM1 | Taper Section | 8.2-12.4 GHz WR90 x CPR137 12 inches length, silver plated brass |
+ |
| PENN ENGINEERING | 4548-51BM3 | WR42 x CPR137 Taper Section | 18.0-26.5 GHz 12 inches length, silver plated brass |
+ |
| PRD | WR42 x WR28 | WR28 x WR42 Taper Section | 26.5-40.0 GHz 5.87 inches length |
+ |
| PRODELIN | WR62 x WR75 | WR62 (choke flange) x WR75 Taper Section | 10.0-15.0 GHz 3 inches length |
+ |
| RACAL | 220-374-1 | WR75/CPR75 x WR62 (choke flange) Taper Section | 10.0-15.0 GHz 1.5 in.length |
+ |
| STRUTHERS | CPR187G x CPR137' | Taper Section | 3.95-5.85 GHz CPR187G (grooved flange) x CPR137 (flat flange) 5.63 inches length, silver/brass |
+ |
| SYSTRON DONNER | DBHK-018 | WR187 x WR112 Taper Section | 3.95-5.85 GHz 8 inches length |
+ |
| SYSTRON DONNER | DBDE-018 | WR28 x WR42 Taper Section | 26.5-40.0 GHz 3 inches length |
+ |
| SYSTRON DONNER | DBEF-018 | WR42 x WR62 Waveguide Taper | 18.0-26.5 GHz 3.75 inches length |
+ |
| TECHNICRAFT | TDRI-422000 | Waveguide Taper | 4.75-11.0 GHz WRD475 x WRD750 6 inches length |
+ |
| TRG | V692G | Taper Section | 140-220 GHz WR5 (mini flange) x WR15 |
+ |
| TRG | A692B/599/383 | WR22 (UG383 flange) x WR28 (UG599 flange) Taper Section | 33.0-50.0 GHz 2 inches length |
+ |
| TRG | K692A | WR28 x WR42 Taper Section | 26.5-40.0 GHz 2.1 inches length |
+ |
| TRG | 692-K-A/595/599 | WR42 x WR28 Taper Section | 18.0-26.5 GHz 2.1 inches length |
+ |
| US ARMY | C5U-83175 | Taper Section | 26.5-40.0 GHz WR112 (proprietary flange) x WR28 (proprietary flange) 1.25x0.57 inch four hole flangepattern WR112 / 0.73x0.55 four hole flange pattern WR28, 1.95 inch length, aluminum |
+ |
| VARIAN | CPR112 x WR137 | Waveguide Taper | 7.05-10.0 GHz CPR112 x WR137 brass, 2.5 inches length |
+ |
| WAVEGUIDE BENDING CO. | 137-112B-1 | Taper Section | 5.85-8.20 GHz WR137 x WR112 6 inches length, brass |
+ |
| WAVELINE | 51284 | Taper Section | 7.05-10.0 GHz CPR112 x WR187 6-1/8 inches length |
+ |
| WAVELINE | 694-C | Taper Section | 7.05-10.0 GHz WR112 (choke flange) x WR90 (choke flange) 5 in. |
+ |
| WAVELINE | 694--A | Taper Section | 7.05-10.0 GHz WR112 (choke flange) x WR90 (cover flange) 5 in. |
+ |
| WAVELINE | WR187-WR90 taper | WR187 (UG choke flange) to WR90 (UG cover flange) Taper Section | 3.95-5.85 GHz 8.6 inches length, brass |
+ |
| WAVELINE | 1194-B | WR22 (UG383/U flange) x WR28 (UG599/U flange) Taper Section | 33.0-50.0 GHz 3.25 inches length, silver/brass |
+ |
| WAVELINE | 70014 | WR75 (cover flange) x WR62 (choke flange) Taper Section | 10.0-15.0 GHz 3 inches length, brass |
+ |
| WAVELINE | 7594-B | WR75 x WR90 Taper Section | 10.0-15.0 GHz 6 inches length, silver/brass |
+ |
| WAVELINE | 794-C | WR90 (choke flange) x WR62 (choke flange) Taper Section | 8.2-12.4 GHz 4 inches length, brass |
+ |
0
0
Votre sélection
Votre sélection est vide