WAVEGUIDE
Recherche avancée
- ADAPTER
- AMPLIFIER
- ANTENNA
- ATTENUATOR
- CALIBRATION
- CIRCULAR SECTION
- CIRCULATOR
- CIRCULATOR / ADAPTER
- CONTROLLER
- CONVERTER
- COUPLER
- COVER PLATE
- DETECTOR
- DOUBLER
- E-H PLANE BEND
- E-H PLANE ELBOW
- E-H PLANE SWITCH
- E-H PLANE TUNER
- FEED HORN
- FILTER
- FLEXIBLE SECTION
- FLEXIBLE SECTION / TWIST SECTION
- FREQUENCY METER
- HORN SECTION
- ISOLATOR
- ISOLATOR / FILTER
- JIG
- JOINT
- LATERAL OFFSET
- MISMATCH SECTION
- MIXER
- MODULATOR
- NOISE SUPPRESSOR
- OSCILLATOR
- PHASE SHIFTER
- POLARIZER
- PRESSURIZATION SECTION
- REFLECTOMETER
- SENSOR
- SHUTTER
- SLOTTED LINE
- SOURCE
- STRAIGHT SECTION
- SWITCH
- TAPER
- TAPER SECTION
- TEE
- TERMINATION
- THERMISTOR MOUNT
- TUNER
- TWIST SECTION
| Fabricant | Modèle | Produit | Caractéristiques | Ajouter à la sélection |
|---|---|---|---|---|
| CMT | AR650-07 | 7 dB Fixed Attenuator | 6.5-18.0 GHz WRD650 1 Watt maximum |
+ |
| CMT | REB750-1C1C-60-2-2 | 60 degree E-Plane Bend | 7.5-18.0 GHz WRD750 aluminum, flat flanges |
+ |
| CMT | REB650-3-3 | 90 degree E-Plane Bend | 6.5-18.0 GHz WRD650 flat/grooved flanges |
+ |
| CMT | WRD650 7 dB att. | 7 dB Fixed Attenuator | 6.5-18.0 GHz WRD650 6 inches length |
+ |
| CMT | REB650-2G2G-6.7 | 90 degree E-Plane Bend | 6.5-18.0 GHz WRD650 6.7 inch legs, grooved flanges |
+ |
| CMT | REB750-1C1C-2.00-2.00 | 90 degree E-Plane Bend | 7.5-18.0 GHz WRD750 aluminum, flat flanges, 2 inch bend radius |
+ |
| CMT | 44-00161-001 | 90 degree E-Plane Bend | 3.95-5.85 GHz CPR187 3 inch bend radius, aluminum, flat/grooved flanges |
+ |
| CMT | RHB75 | 90 degree H-Plane Bend | 10.0-15.0 GHz WR75 |
+ |
| CMT | RHB475-3-3 | 90 degree H-Plane Bend | 4.75-11.0 GHz WRD475 aluminum, flat flanges |
+ |
| CMT | RHB650-2-2 | 90 degree H-Plane Bend | 6.5-18.0 GHz WRD650 flat flanges |
+ |
| CMT | RHB750-2.50 | 90 degree H-Plane Bend | 7.5-18.0 GHz WRD750 2.5 inch bend radius, aluminum, flat flanges |
+ |
| CMT | DRT180-1C1C-90-4 | 90 degree Left Hand Twist Section | 18.0-40.0 GHz WRD180 4 inches length |
+ |
| CMT | RA137-K-F-21BC | Adapter | 5.85-8.20 GHz CMR137 x 2.92mm(f) |
+ |
| CMT | RA22-K-F | Adapter | 33.0-50.0 GHz WR22 x 2.92mm(f) |
+ |
| CMT | RA28-K-F-1A-A | Adapter | 26.5-40.0 GHz WR28 x 2.92mm(f) |
+ |
| CMT | RA42-K-F-1A-A | Adapter | 18.0-26.5 GHz WR42 x 2.92mm(f) |
+ |
| CMT | RA75-N-F-4AA | Adapter | 10.0-15.0 GHz WR75 (choke flange) x N(f) |
+ |
| CMT | RA75-SMA-F-13A-AA | Adapter | 10.0-15.0 GHz CPR75 (PDR120) x SMA(f) |
+ |
| CMT | 1062204 | Adapter | 6.5-18.0 GHz WRD650 x SMA(f) |
+ |
| CMT | 106535 | Adapter | 6.5-18.0 GHz WRD650 x TNC(f) |
+ |
| CMT | DRA-750-SMA-F | Adapter | 7.5-18.0 GHz WRD750 x SMA(f) |
+ |
| CMT | RA284-TNC-F-13A-A | Adapter | 2.60-3.95 GHz CMR284 / CPR284F (flat flange) x TNC(f) aluminum, drilled for both CPR & CMR hole patterns |
+ |
| CMT | RA284-7MM | Adapter | 2.60-3.95 GHz CPR284F (flat flange) x APC7 aluminum body |
+ |
| CMT | RA187-7MM | Adapter | 3.95-5.85 GHz CPR187 (flat flange) x APC7 aluminum body |
+ |
| CMT | FLG580-2-C | Aluminum flat flange | 5.8-16.0 GHz WRD580 *new old stock* |
+ |
| CMT | DBCC180-10 | Directional Coupler | 18.0-40.0 GHz WRD180 10 dB coupling, 2.92mm(f) coupled port |
+ |
| CMT | DBCC580-N-F-50-2G-2G-SP | Directional Coupler | 5.8-16.0 GHz WRD580 50 dB coupling, N(f) coupled port, grooved flanges |
+ |
| CMT | 1062310 | Dual Directional Coupler | 5.8-16.0 GHz WRD580 30 dB and 40 dB coupling on SMA(f) coupled ports, 12.75 inches length, grooved flanges |
+ |
| CMT | DDBCC580-SMA-F-50/50-2G-2G-SP | Dual Directional Coupler | 5.8-16.0 GHz WRD580 50 dB, SMA(f) coupled ports, grooved flanges, aluminum, 22.9 inches length |
+ |
| CMT | RDCC137-3-NF-30/30-10B10B-C | Dual Directional Crossguide Coupler | 5.85-8.20 GHz CPR137G (grooved flange) 30 dB coupling, N(f) coupled ports, 5.73 inches length, brass |
+ |
| CMT | 106096-1 | Dual Directional Crossguide Coupler | 7.5-18.0 GHz WRD750 50 dB, SMA(f) cpld. |
+ |
| CMT | HPM750-9.6 | High Power Mismatch | 7.5-18.0 GHz WRD750 9.6 dB return loss, 350 Watts CW |
+ |
| CMT | DFG750-8.18 | Jacketed Flexible Waveguide | 7.5-18.0 GHz WRD750 8.18 inches length, aluminum, flat flanges |
+ |
| CMT | WS137 & WS137-1/4 | Flush Short and 1/4-wavelength (13.850mm) Offset | 5.85-8.20 GHz CPR137 brass |
+ |
| CMT | HPTAC650-2C | High Power Load | 6.5-18.0 GHz WRD650 750 Watts average, with 115VAC fan |
+ |
| CMT | DFG580-16-2G2G | Jacketed Flexible Waveguide Section | 5.8-16.0 GHz WRD580 16 in. length *new old stock* |
+ |
| CMT | DFG580-3-1G1G | Jacketed Flexible Waveguide Section | 5.8-16.0 GHz WRD580 3 in. length *new old stock* |
+ |
| CMT | LPT650 | Low Power Termination | 6.5-18.0 GHz WRD650 5 Watts maximum, 1.10 VSWR |
+ |
| CMT | RFG50-3 | Jacketed Flexible Waveguide Section | 5.8-16.0 GHz WRD580 3 inches length, grooved flanges *new old stock* |
+ |
| CMT | PLPT-137 | Precision Low Power Termination | 5.85-8.20 GHz CPR137F 2 Watts maximum, 1.02 VSWR, 12 inches length, brass |
+ |
| CMT | HTD750-7.5-18 | Matched Hybrid Tee | 7.5-18.0 GHz WRD750 |
+ |
| CMT | DRPW350-2C-2G | Pressure Window | 3.5-8.2 GHz WRD350 aluminum, flat/grooved flanges, 30 PSI max., 1.10 VSWR, 1000 Watts |
+ |
| CMT | DRPS650-1-TNC | Sampling Coupler | 6.5-18.0 GHz WRD650 30 dB, TNC(f) coupled port, 2 in.length |
+ |
| CMT | DRPW350-2C-2G | Pressure Window | 3.5-8.2 GHz WRD350 30 PSI, 1000 Watts, 1.10 VSWR, flat/grooved flanges |
+ |
| CMT | DRPS650-40 | Sampling Coupler | 6.5-18.0 GHz WRD650 40 dB, TNC(f) coupled port, 2 inches length |
+ |
| CMT | DRS580-3C-2G-24.00 | Straight Section | 5.8-16.0 GHz WRD580 24 inches length, aluminum, flat/grooved flanges |
+ |
| CMT | DRS580-3C-3C-2.75 | Straight Section | 5.8-16.0 GHz WRD580 2.75 inch length, aluminum, flat flanges |
+ |
| CMT | ST580-2 | Straight Section | 5.8-16.0 GHz WRD580 2 inches length, aluminum, flat/grooved flanges *new old stock* |
+ |
| CMT | DRS650-2 | Straight Section | 6.5-18.0 GHz WRD650 2 inches length |
+ |
| CMT | WT475-112-8 | Taper Section | 4.75-11.0 GHz WRD475 x CPR112 8 inches length, aluminum |
+ |
| CMT | WCK-28 | Waveguide Calibration Kit | 26.5-40.0 GHz WR28 (2) PLPT-28 fixed terminations; (2) RA28-K-F-1A-A adapters to 2.92mm f; (1 each) WOS-28-1/8 & -3/8 1/8- & 3/8-wavelength offset shorts |
+ |
| CMT | WT650-112-1C-1A | Taper Section | 6.5-18.0 GHz WRD650 x WR112 (UG flange) 6.5 inches length, aluminum |
+ |
| CMT | WT650-102A | Waveguide Taper | 6.5-18.0 GHz WRD650 x WR102 6-1/2 inches length |
+ |
| CMT | RBC102-10-1A1A | Directional Coupler | 7.5-11.0 GHz WR102 10 dB coupling *UNUSED* |
+ |
| CMT | RFG102-7.5 | Jacketed Flexible Section | 7.5-11.0 GHz WR102 7-1/2 inches length |
+ |
| CMT | RAH187-N-F-1A-A | WR187 High Power Adapter to N(f) | 3.95-5.85 GHz aluminum body, 1000 Watts average power |
+ |
| CMT | RHB112-1B5B-1.65-1.63-C | 90 degree H-Plane Bend | 7.05-10.0 GHz WR112 brass, cover/choke flanges |
+ |
| CMT | RHB112 | Asymetrical 90 degree H-Plane Mitre Bend | 7.05-10.0 GHz WR112 1.38"x2.75"legs |
+ |
| CMT | RAH187-TNC-1A-A | WR187 High Power Adapter to TNC(f) | 3.95-5.85 GHz aluminum body, 1000 Watts average power |
+ |
| CMT | RA187-N-F-1A-A | WR187 x N(f) Adapter | 3.95-5.85 GHz aluminum body |
+ |
| CMT | RT22-1B1B | WR22 (UG599/U-M square flange) 90 degree Twist Section | 33.0-50.0 GHz 2 inches length, brass |
+ |
| CMT | RCC-28-2-20 | WR28 3-Port Crossguide Coupler | 26.5-40.0 GHz 20 dB coupling *new old stock* |
+ |
| CMT | BFU22-1A1A-A-SP | WR22 (UG599/U-M square flange) Bulkhead Feedthrough | 33.0-50.0 GHz 3 in. length, 1.75 in. 8-hole flange mount, aluminum |
+ |
| CMT | AR28-3-1A1A-A | WR28 3 dB Fixed Attenuator | 26.5-40.0 GHz 1 Watt maximum *new old stock* |
+ |
| CMT | REB28-1A1A-1.5-1.5-A | WR28 90 degree E-Plane Bend | 26.5-40.0 GHz 1.5 inch bend radius, aluminum |
+ |
| CMT | RHB28-1A-1A-1.5 | WR28 90 degree H-Plane Bend | 26.5-40.0 GHz 1.5 inch bend radius, cover flanges, aluminum |
+ |
| CMT | RHB28-1B2B-1.12 | WR28 90 degree H-Plane Bend | 26.5-40.0 GHz brass, 1.12 inch bend radius |
+ |
| CMT | RHB28-1B-8B | WR28 90 degree H-Plane Bend | 26.5-40.0 GHz 1 inch bend radius, cover/choke flanges, brass |
+ |
| CMT | RBC28-10-1A1A1A-1 | WR28 Directional Coupler | 26.5-40.0 GHz 10 dB coupling |
+ |
| CMT | RT28-1A-1A-90-3-A | WR28 90 degree Twist Section | 26.5-40.0 GHz 3 inches length, aluminum' |
+ |
| CMT | RT28-1B-1B-2-C | WR28 90 degree Twist Section | 26.5-40.0 GHz 2 inches length, brass |
+ |
| CMT | RBC28-20-1A1A1A-1 | WR28 Directional Coupler | 26.5-40.0 GHz 20 dB coupling |
+ |
| CMT | RFG28-24-1A-1A-NSR | WR28 Jacketed Flexible Waveguide | 26.5-40.0 GHz 24 inches length, aluminum |
+ |
| CMT | RFG28-6-1A-8A-NSR | WR28 Jacketed Flexible Waveguide | 26.5-40.0 GHz 6 inches length, aluminum, cover/ choke flanges |
+ |
| CMT | LPTS-28 | WR28 Sliding Termination | 26.5-40.0 GHz uncalibrated drive with locking screw |
+ |
| CMT | WR28 74.38" | WR28 Straight Section | 26.5-40.0 GHz 6 ft. 2-3/8 inch length, aluminum, cover/choke flanges |
+ |
| CMT | TX28-1A-SP | WR28 Standard Gain Horn | 26.5-40.0 GHz 20.8 dBi gain mid-band, with 2.25 x 1.88 inch mounting flange at aperture |
+ |
| CMT | 58P33762Y | WR28 Straight Section | 26.5-40.0 GHz 72 inches. length, aluminum, cover/choke flanges |
+ |
| CMT | RS28-1A1A-4.0-A | WR28 Straight section | 26.5-40.0 GHz 4 inches length, aluminum |
+ |
| CMT | RS28-1A1A-6.0-A | WR28 Straight Section | 26.5-40.0 GHz 6 inches length, aluminum *new old stock* |
+ |
| CMT | 1062690 | WR28 x 2.92mm male Adapter | 26.5-40.0 GHz incorporates mitre E Plane bend, 2.65 x 3.85 inch leg lengths *new old stock* |
+ |
| CMT | RS28-1A1A-8.0-A | WR28 Straight Section | 26.5-40.0 GHz 8 inches length, aluminum *new old stock* |
+ |
| CMT | RS28-1B1B-6.0-C | WR28 Straight Section | 26.5-40.0 GHz 6 inches length, brass |
+ |
| CMT | RA284-N-F-1A-A | WR284 x N(f) Adapter | 2.60-3.95 GHz aluminum body |
+ |
| CMT | RCC-34-3.5MM-F-20-3B | WR34 3-Port Crossguide Coupler | 22-33 GHz 20 dB coupling, 3.5mm(f) coupled port |
+ |
| CMT | RT34-1A-1A-90-2.06-A | WR34 90 degree Twist Section | 22-33 GHz aluminum, 2.06 inches length |
+ |
| CMT | REB34-1A1A-1.0-4.5-A | WR34 Assymetrical 90 degree E-Plane Bend | 22-33 GHz 1.0 inch x 4.5 inch legs, aluminum |
+ |
| CMT | REB34-1A1A-1.00-2.75-A | WR34 Assymetrical E-Plane Bend | 22-33 GHz 1.00 & 2.75 inch leg lengths, aluminum |
+ |
| CMT | RPWQ34-1A-050809 | WR34 Pressure Window | 22-33 GHz 30 PSI maximum, 1.2 VSWR, 0.38 inch thick |
+ |
| CMT | RBC34-10-1A-1A-1A-A | WR34 Directional Coupler | 22-33 GHz 10 dB coupling |
+ |
| CMT | REB34-1A1A-2.38-4.50-A | WR34 Assymetrical E-Plane Bend | 22-33 GHz 2.38 & 4.50 inch leg lengths, aluminum |
+ |
| CMT | RA34-2.4-F-2A-A | WR34 x 2.4mm(f) Adapter | 22-33 GHz aluminum body |
+ |
| CMT | 1063931 | WR34 x 2.92mm(f) Adapter | 22-33 GHz brass body |
+ |
| CMT | RA34-K-F-1A-A | WR34 x 2.92mm(f) Adapter | 22-33 GHz aluminum body, flange interface drilled for both UG1530 and UBR260 hole patterns |
+ |
| CMT | RCC-42-3-3.5MM-F-30-5B5B | WR42 3-port (terminated) Crossguide Coupler | 18.0-26.5 GHz 30 dB coupling, 3.5mm(f) coupled port, choke flanges input & output, brass body |
+ |
| CMT | LPTSL42-7A-A | WR42 (choke flange) Low Power Termination | 18.0-26.5 GHz 2 Watts, 1.10 VSWR, 1.5 inch body length |
+ |
| CMT | AR42-3 | WR42 3 dB Fixed Attenuator | 18.0-26.5 GHz 1 Watt maximum |
+ |
| CMT | RHB42-1A1A0-2.0 | WR42 90 degree H-Plane Bend | 18.0-26.5 GHz 2 inch bend radius, aluminum |
+ |
| CMT | REB42-1A1A-2.38-4.5-A | WR42 Asymetrical 90 degree E-Plane Bend | 18.0-26.5 GHz 2.38 and 4.5 inch leg lengths, aluminum |
+ |
| CMT | RT42 | WR42 90 degree Twist Section | 18.0-26.5 GHz aluminum, 2.12 inches length |
+ |
| CMT | RT42-1A1A | WR42 90 degree Twist Section | 18.0-26.5 GHz aluminum, 2.1 inches length |
+ |
| CMT | RBC42-10-1A1A | WR42 Directional Coupler | 18.0-26.5 GHz 10 dB coupling |
+ |
| CMT | LPTS-42 | WR42 Sliding Termination | 18.0-26.5 GHz uncalibrated drive with locking screw |
+ |
| CMT | 20565-002A | WR42 Precision Fixed Attenuator | 18.0-26.5 GHz 6 dB, 1 Watt maximum, 11 inches length |
+ |
| CMT | RHB51-1A1A-1.5-A | WR51 90 degree H-Plane Bend | 15.0-22.0 GHz 1.5 inch bend radius, aluminum |
+ |
| CMT | RHB51-1A1A-4.0-1.5-A | WR51 Assymetrical 90 degree H-Plane Bend | 15.0-22.0 GHz 1.5 x 4.0 inch legs, aluminum |
+ |
| CMT | BFU51-1B1B-C | WR51 Bulkhead Feedthrough Unit | 15.0-22.0 GHz 3 inches length, mounting on a 3.25 inch diameter 8-hole plate |
+ |
| CMT | RFG42-8-1B1B-HP | WR42 Unjacketed Flexible Section | 18.0-26.5 GHz 8 inch length, brass |
+ |
| CMT | AR51-6-1B1B-C | WR51 Fixed Attenuator | 15.0-22.0 GHz 6 dB, 1 Watt maximum power |
+ |
| CMT | RFG51-11-1B1BNC | WR51 Unjacketed Flexible Section | 15.0-22.0 GHz 11 inches length, brass, cover flanges |
+ |
| CMT | RCC-62-2-30-4B-4B-C | WR62 3-Port Crossguide Coupler | 12.4-18.0 GHz 30 dB coupling, brass, choke flange input/ cover flange output/ choke flange coupled port |
+ |
| CMT | RBC62-10-1A1A1AA | WR62 Directional Coupler | 12.4-18.0 GHz 10 dB coupling |
+ |
| CMT | RFG51-7.5-1B1BNC | WR51 Unjacketed Flexible Section | 15.0-22.0 GHz 7.5 inches length, brass, cover flanges |
+ |
| CMT | WT62-75-8B-7B-B | WR62 (choke flange) x WR75 (choke flange) Taper Section | 12.4-18.0 GHz 4 inches length, brass |
+ |
| CMT | 1063637 | WR62 Liquid Cooled Load | 12.4-18.0 GHz 694 Watts power dissipation for 2 gpm flow |
+ |
| CMT | RPS62-60 | WR62 Power Sampler | 12.4-18.0 GHz 60 dB coupling, SMA(f) coupled port, 0.75 inch length |
+ |
| CMT | RBC62-10-1A1A1A-A | WR62 Directional Coupler | 12.4-18.0 GHz 10 dB coupling |
+ |
| CMT | 20565-001 | WR62 Precision Fixed Attenuator | 12.4-18.0 GHz 6 dB, 1 Watt maximum, 15.5 inches length |
+ |
| CMT | RPS75-2SMAF40 | WR75 Power Sampler | 10.0-15.0 GHz 40 dB coupling/SMA(f), 0.75 in. length *new old stock* |
+ |
| CMT | RFG67-5.8 | WR67 Flexible Waveguide Section | 12.4-18.0 GHz 5.8 inches length |
+ |
| CMT/ COBHAM | RBCC51-K-F-10-1A1A1A | WR51 Directional Coupler | 15.0-22.0 GHz 10 dB coupling, 2.92mm(f) coupled port *new old stock* |
+ |
| CMT | RPS75-60 | WR75 Power Sampler | 10.0-15.0 GHz 60 dB coupling, SMA(f) coupled port, 0.75 inch length |
+ |
| COLEMAN MICROWAVE | 400200 | Band Pass Filter | 8.2-12.4 GHz WR90 14 section, 9.30-9.93 GHz, 13 inches length, silver/brass |
+ |
| COLEMAN MICROWAVE | 502550M | Tunable BPFL | 2.60-3.95 GHz CPR284 2.7-2.9 GHz, 10 MHz 3 dB bw, 0.5dB loss,30" length |
+ |
| COLEMAN MICROWAVE | BS-104261 | WR187 Band Reject Filter | 3.95-5.85 GHz 30 dB rejection 4.30-4.45 GHz, passband 5.4-5.0 GHz, 5 in. length, cover/choke flanges |
+ |
| COLEMAN MICROWAVE | 3567152-6 | WR62 Band Pass Filter | 12.4-18.0 GHz 13.21-14.97 GHz, silver/brass, choke flanges, 5 inches length |
+ |
| COLEMAN MICROWAVE | 8567152-2 | WR62 Band Pass Filter | 12.4-18.0 GHz 13.295-13.335 GHz, silver/brass, choke flanges, 7 inches length |
+ |
| COLEMAN MICROWAVE | 8567152-5 | WR62 Band Pass Filter | 12.4-18.0 GHz 13.425-13.475 GHz, silver/brass, choke flanges, 5 inches length |
+ |
| COLLINS | 355-0516-010 | Circulator | 5.85-8.20 GHz CMR137 30 dB isolation, 5.8-6.6 GHz, 3.25 inches length |
+ |
| COLLINS | 4.595 GHz notch | Notch Filter | 3.30-4.90 GHz CMR229 -30 dB 4595-4596 MHz, -3 dB points 4583, 4608 MHz, passband to 3.7 GHz & 4.65 GHz, silver/brass, 5 inches length |
+ |
| COLLINS | 522-7475-003 | Single Cavity Tunable Bandpass Filter | 5.85-8.20 GHz WR137 5.8-7.7 GHz, 10 MHz 3 dB bw, inserion from 9 dB @ 5.8 GHz to 2 dB @ 7.7 GHz, vernier drive, 2.5 inches length, silver/brass |
+ |
| COLLINS | 355-0460-070 | Isolator | 3.30-4.90 GHz CMR229 20 dB, 3.5-4.2 GHz, 5 inches length |
+ |
| COM-DEV LTD. | 11445 | WR75 Band Pass Filter | 10.0-15.0 GHz 13.84-14.59 GHz, 6 inches length, brass |
+ |
| COM-DEV LTD. | 10309-2 | 4.4 GHz Low Pass Filter | 3.30-4.90 GHz CPR229G (grooved flanges) -30 dB at 5.1 GHz, 6.25 inches length, aluminum |
+ |
| COM-DEV LTD. | SPT-50-1 | Directional Coupler | 3.30-4.90 GHz CPR229/CMR229 10 dB coupling, 47 in. length |
+ |
| COM-DEV LTD. | WR112 BPFL | Band Pass Filter | 7.05-10.0 GHz WR112 7.10-9.27 GHz, 4.88 inches length, silver/brass |
+ |
| COMMSCOPE | C090-CNSG | Adapter | 8.2-12.4 GHz CPR90G (grooved flange) x N(f) |
+ |
| COMTECH PST | 214002105E | WR28 Short Body Directional Couopler | 26.5-40.0 GHz 15 dB coupling, directivity 20 dB, 4 inches length, aluminum, all UG600/U choke flanges |
+ |
| CONNECTICUT MICROWAVE | CMM-011 | WR62 x WR51 (UBR1280 flange) Taper Section | 12.4-18.0 GHz 2.38 inches length, aluminum |
+ |
| CONNECTICUT MICROWAVE | 334031 | Sampling Coupler | 8.2-12.4 GHz WR90 60 dB, 9.2-9.5 GHz, SMA(f) coupled port, 2.62 inch length, aluminum |
+ |
| CTR | 201333 | WR42 Downconverter | 18.0-26.5 GHz RF=21-22 GHz, LO=6.5-7.0G, IF=1-2 GHz, +5V |
+ |
| CUBIC | CU-51-1000 | WR284 x WR112 Taper Section | 2.60-3.95 GHz 9.38 inches length |
+ |
| CUBIC | CU-52-1000 | WR284 x WR90 Taper Section | 2.60-3.95 GHz 10.38 inches length |
+ |
| CUBIC | 9E-00643 | WR284 High Power Load | 3.95-5.85 GHz 2500 Watts average/ 1.3 MW peak, 25.88 inches length |
+ |
| CUSTOM MICROWAVE | HB15R | 90 degree H-Plane Bend | 50-75 GHz WR15 |
+ |
| CUBIC | 120095-1 | WR62 Straight Section | 12.4-18.0 GHz 2 inches length, aluminum, cover flanges |
+ |
| CUSTOM MICROWAVE | ST15R-2.0 | WR15 Straight Section | 50-75 GHz 2 inches length |
+ |
| CUSTOM MICROWAVE | EH5RB | WR5 E-H Plane Tuner | 140-220 GHz micrometer drives, mini (FXR) flanges |
+ |
| CUSTOM MICROWAVE | ST12R-4.0 | Straight Section | 60-90 GHz WR12 4 inches length |
+ |
| DADEN ASSOCIATES | WG-11950-500-3 | WR75 Band Pass Filter | 10.0-15.0 GHz 11.7-12.2 GHz, 3.12 inches length, brass |
+ |
0
0
Votre sélection
Votre sélection est vide